The case is equipped with ball bearing casters with a diameter of 80 mm. Two of the casters are equipped with brakes. Silver anodised aluminium profiles protect the edges from shocks and ensure an exact fitting of the individual sections. There are four locking chromium-plated automatic locks per section. For charging the microphone units are put into the charging facilities. Shock-mounted charging contacts ensure the electric connection between microphone unit and power supply unit. All batteries are charged simultaneously. After approximately 2 hours the battery is fully charged, depending on the previous use. The charging state of the batteries is indicated by the LED ring of the gooseneck microphone and can be seen from the outside through a window or when the cover is opened. To avoid a self-discharge of the batteries, trickle charging is carried out. So each microphone unit has its full capacity at any time. Therefore, beyerdynamic recommends the charger being connected to the mains permanently.
• Modular case to accommodate the microphone units, charging electronics and discussion control unit
• Integrated power supply unit for charging 1 to 10 microphone units
• Simultaneous charging of all batteries without a previous discharge being necessary
• Window to observe the charging status
- article No.
CC12_DB_E.pdf (502.40 KB)
EU Declaration of Conformity
DEC_CC12_EN_EU.pdf (383.37 KB)
In the service area